Hydraulic workshop press

SEFAC offers a wide range of workshop presses for industry and heavy duty vehicle repair shops. These machines are a must in your workshops and will greatly ease your maintenance operations.
They are fitted with a mobile transverse actuator as well as a system for raising and lowering the motorized table using the actuator of the press via a chain-driven movement transmission.

The presses are delivered with 2 removable pressure blocks allowing the installation of different mandrels.

Depending on the version, SEFAC presses can be equipped with a manual pump with quick pneumatic approach or an electrohydraulic pump with 1 or 2 speeds.

As an option, the presses can be fitted with a protective screen which is essential for safety.

Technical characteristics

Reference	APA 9025H	APA 9040H	APA 9040EH1-D	APA 9060H	APA 9060EH1-D	APA 9060EH2-D	APA 90100H	APA 9010EH2-D
Capacity	25t	40t	40t	60t	60t	60t	100t	100t
C	220 mm	265 mm	265 mm	310 mm	310 mm	310 mm	300 mm	300 mm
D	150 mm	300 mm	300 mm	300 mm	300 mm	300 mm	300 mm	300 mm
E	105-780 mm	85-785 mm	85-785 mm	180-780 mm	180-780 mm	180-780 mm	75-675 mm	75-675 mm
F	1 620 mm	1 740 mm	1 740 mm	1 982 mm	1 982 mm	1 982 mm	2 042 mm	2 042 mm
G	130 mm	215 mm	215 mm	259 mm	259 mm	259 mm	325 mm	325 mm
L	135 mm	140 mm	140 mm	120 mm	120 mm	120 mm	120 mm	120 mm
J*	9,2	–	6,1	–	4,2	10	–	6,2
K**	4,3	–	7,9	–	5,9	14,5	–	8,3
Weight	135	425	445	625	630	635	1 200	1 215

*J: Cylinder speed in mm/s for electro-hydraulic press
**K: Cylinder return speed mm/s for electro-hydraulic press

Technical diagram

Explanations concerning the nomenclature of the pumps:

H: standard model fitted with a manual pump with rapid double-acting pneumatic approach, pedal control
EH1: model fitted with a single-speed electro-hydraulic pump
EH2: model fitted with a two-speed electro-hydraulic pump
D: model fitted with a double-acting cylinder

The EH model is equipped with a double-acting cylinder and a three-phase motorization in 3×400 V, operating at a frequency of 50/60 Hz. An adaptation of the three-phase motorization in 3×230 V and at a frequency of 50/60 Hz is possible.

The EH model is also available with a 230 V or 400 V single-phase motor, at a frequency of 50/60 Hz.

Related accessories

SEFAC technology

The column can move in all directions with its pallet truck-type movement system to free up the lifting area. No interference issues with the vehicle’s dynamic gauge.