SEFAC has designed a range of column lifts specifically for the maintenance of forklifts. The 600M40 8 tons (2x4t) column lifts have been developed to lift 3 and 4-wheeled forklifts from the sides. The forks have been engineered to accommodate all types of forklifts, providing time savings, flexibility and versatility to your maintenance shop.
The 2 columns are connected by a cable to operate as a pair using a switch placed on the main column. It has a wired remote control that can be connected and used on both columns.
The 600M40 column lifts have one access ramp each to facilitate the lifting of 4 wheel trucks with low ground clearance. They are delivered with their crossbeam (2 in pair) to be put on the forks for the grip under the forklift chassis.
Read about our technological solutions: Screw/nut system
| Reference | 600M40* |
| Capacity per column | 4t |
| Operating mode | Individual, set |
| Control mode | Push button |
| Grip | Side grip |
| Lifting speed | 500 mm/min |
| Descent speed | 500 mm/min |
| Lifting height | 1 820 mm |
| Height difference correction | Correction +/- 18 mm Default +/- 36mmOption ISO++ : Correction +/- 6mm Default +/- 18mm |
| Spacing | 1 045 l (mm) |
| x 1 140 L (mm) | |
| x 2 475 h (mm) | |
| Feet height | 115 mm |
| Weight per column | 385 kg |
| Engine power | 2,2 kW |
| Protection rating | IP54 |
*We recommend checking the following before choosing 600M40 columns:
The column can move in all directions with its pallet truck-type movement system to free up the lifting area. No interference issues with the vehicle’s dynamic gauge.
Subscribe to our list to receive news from our company.
